Utility 4000D-X Composite Dry Van Trailer

Utility 4000D-X Composite:

• Gross vehicle weight rating (GVWR): 65,000 lb
• Payload capacity: 55,000 lb
• Inside height: 110½” at front and 111″ at rear
• Inside width: 101″ at wearband
• Overall length: 53′ 0″
• Overall height: 13′ 6″ on 46½” height 5th wheel
• Overall width: 102⅜”
• Deck type: Straight with ½” wedge
• Front subframe: 3½” deep box beam design; raised 1⅜”
• Approach plate: 8 ga. carbon steel full width
• Kingpin location: 36″ from front
• Kingpin plate: 3 ga. high strength steel full width
• Kingpin type: AAR hardness cruciform
• Support legs: Jost® model A401 enhanced 50,000 lb capacity
• Support leg location: 105″ from center line of kingpin to center line of support legs
• Support leg shoe type: 10″ × 10″ ultra low profile cushion foot
• Support leg bracing: Bolt-on cross-bracing with 7 ga. 3¼” deep high strength steel channels
• Support leg crank location: Roadside of support legs
• Bottom rails: 10⅝” deep heavy-duty extruded aluminum
  Crossmembers front subframe to legs: 23⁄16″ steel hat-shaped crossmembers with continuous endplate
• Crossmembers legs to rear subframe: 4″ steel 80,000 psi I-beam crossmembers with 4 rivet end clips on 12″ center line
• Crossmembers over rear subframe: 4″ steel I-beam crossmembers with 4 rivet end clips on 12″ center line
• Crossmembers over support legs: (5) 4″ steel I-beam crossmembers with 4 rivet end clips on 12″ center line over legs
• Vertical and horizontal I.C.C. bumper: D.O.T. high strength steel vertical with non-slip 7″ deep horizontal
• Hendrickson air ride system with integral axles: Hendrickson® HKANT 40K air ride/slider system with 49″ axle spacing on HD slider
• Slider suspension location: 70″ rear and 166″ forward for 96″ of slider travel
• Slider pin release mechanism: Hendrickson® Quik-Draw® air-operated slider repositioning system
• Slack adjusters: Bendix® Versajust® automatic
• Air actuation system: 1 tank with spring brakes
• Air brake chambers: Bendix® EnduraSure™ 3030
• Air ride dump valve: Hendrickson® automatic
• Anti-lock brake system (ABS): Bendix® TABS-6 2S/1M
• Axle spindle nuts: Hendrickson® precision
• Brake lining style: Hendrickson® HXS brake lining style
• Hub piloted system with outboard drums: 10 stud hub piloted system with outboard cast drums with 16½” × 7″ brakes
• Hubcaps: Federal-Mogul “non-vented”
• Oil seals: Federal-Mogul 5 star oil seal with 5-year warranty
• Wheel bearing lubrication: Mobilube HD Plus 80W-90 oil
• Wheel bearings: General bearings (cones) and races (cups)
• Front panels: .040″ aluminum, pre-painted white with Ultra Road Shield™ Plus (URS+)
• Front wall posts: (4) 2″ 14 ga. high strength 50 steel hat-shaped posts
• Front corner post: .080″ extruded aluminum 4¾” radius
• Front top rail: Extruded aluminum wraparound
• Gladhands and receptacle location: Gladhands and receptacle mounted on an aluminum extrusion offset to roadside
• Side panels:
  • Composite panel side wall design with injected polyurethane foam core; .040″ aluminum exterior side wall panels, pre-painted white with Ultra Road Shield™ Plus (URS+)
• Side posts:
  • ⅜” 14 ga. high strength galvanized hat-shaped 24″ center line; (front and rear subframe 16″ center line) with “A” slots on 8″ vertical center line; posts on 12″ center line at extreme front panel
• Roof skin: .040″ one-piece aluminum coil
• Roof bows: 11⁄16″ anti-snag 18 ga. galvanized steel bows bonded to roof skin
• Top rails: 4½” deep heavy-duty extruded aluminum
• Rear case & buckplate material: Satin finish stainless steel
• Rear case corner posts & header: Satin finish stainless steel
• Rear door hinge material: Non-polished aluminum
• Rear door hinges: 4 per door
• Holdbacks: Chain link and hook type door
• Rear door lock rods: 1 per door
• Rear door panels: ½” composite rear swing doors with pre-painted white galvanized steel panels with polyethylene core
• Rear treadplate: .219″ high × 27″ deep high strength steel treadplate integral with rear buckplate
• Floor type: 1⅜” laminated hardwood floor with 20,000 lb front axle fork truck rating and with 3 screws per board per crossmember
• Floor joint sealant: Caulking applied prior to assembly between each joint
• Front wall lining: (2) .016″ grade 80 galvanized (G40) steel panels pre-painted white with rolled edges
• Front wall wearband: 14″ high galvanized steel grade 80
• Side wall lining: Snag-Free® pre-painted white galvanized steel “anti-snag”
• Side wall lining closures: 45° front corner diagonal lining closures
• Wearband: 18 ga. 12″ high corrugated steel surface mounted
• Rear door lining: Pre-painted white galvanized steel door panels with polyethylene core
• Electrical receptacle: 7-way without circuit breakers
• Main harness: Utility moisture-resistant 6-wire harness with internal ground and 7-way plug
• Clearance lights quantity: 0-1-2-5 D.O.T. minimum clearance light package
• Rear header clearance lights: Grote® Micronova® LED grommet-mounted
• Upper clearance lights: Factory choice LED with 3″ mounting hole at center line
• Lower clearance lights: Grote® Micronova® LED PC-rated
• Side mounted directional light: Grote® Supernova® LED combo on bracket below bottom rail (each side)
• ABS warning light: Grote® Micronova® LED PC-rated
• Stop, tail, turn lights: Grote® 4″ LED (10-diode) lights, 2 per side with black snap-in flange
• Conspicuity tape location: On bottom rails and at rear
• Front panel finish: Pre-painted white with Ultra Road Shield™ Plus (URS+)
• Front corner post finish: Natural aluminum
• Front subframe assembly finish: Fully flooded inside with black rust preventative finish, top plate prime painted
• Side panel finish: Pre-painted white with Ultra Road Shield™ Plus (URS+)
• Rear case finish: Satin finish stainless steel
• Rear subframe finish: Rust preventative coating
• Vertical & horizontal I.C.C. bumper finish: Utility black enamel on horizontal bumper, black scharpf on vertical bumper
• Bottom side rail finish: Natural aluminum
• Top front & top side rail finish: Natural aluminum
• Roof exterior finish: Natural aluminum
• Floor undercoat: Pre-coated with black sealer on bottom of wood floor
• Support leg finish: Rust preventative coating
• Mudflap type: Black plastic anti-sail with Utility logo, mounted with steel reinforcing straps
• Side mounted aerodynamic air deflectors: Advanced aerodynamic side skirt USS-120A-4
• 22.5″ × 8.25″ standard width wheels: Factory choice steel 10 hub piloted wheels
• Tires: BFGoodrich 275/80R 22.5 TR144 LRG 14 ply, load range G