Product Spotlight – Trailers
Fontaine Infinity Forklift Trailer
A look at the Fontaine Infinity Forklift Trailer. Unlike other trailers that are equipped with aftermarket bolt-on forklift kits, the Infinity is specifically designed and manufactured to be a forklift hauler.
Fontaine Infinity Forklift Trailer
- Overall Length x Width: 45′ x 102″
- Suspension: Sliding air tandem set in a fixed location
- Frame Rating: 80,000 lbs distributed–GAWR and tire ratings determine legal payloads
- Flooring: 1 1/8″ aluminum with 4 apitong wood nailer strips
- Crossmembers: 12″ centers – 4″ jr. I-steel
- Coil Package: Single coil hauling package included
- Side Rails: Exclusive Revolutionary RASR siderail technology–one piece routed aluminum designed for exceptional strength and impact resistance
- Chain Cargo Tie Downs: available as an option
- Stake Pockets: Routed aluminum on 24-inch centers (Two load securement openings between stake pockets)
- Rubrail: Integrated with siderail
- Main Beams: 130K load bearing flanges
- Kingpin: Set at 30″ with 49″ loaded fifth wheel height
- Landing Gear: OEM STANDARD
- Knee Braces: Fabricated on approximately 60″ centers
- Bulkhead Pockets: Four steel DOT-type, welded to front
- Optional Bulkhead: Steel DOT-type, 4-Post, no turnback, 48″ high, approx 330 lbs, available as an option
- Axles: 2 Axles with 49″ spread
- Axle Spindle: Tapered
- Brakes: Spring brakes, auto slacks
- Air Line Filters: Two Meritor In-line type installed
- ABS: 4S/2M no cable or tool
- Hub and Drums: 10-hole, hub-piloted, outboard cast drums (hubodometer available as an option)
- Wheel Ends: Grease in hubs; 5-year wheel end warranty
- Wheels: 22.5 x 8.25 steel disc pre-painted white (optional aluminum wheels available)
- Tires: 295/75R 22.5 14PR – OEM STANDARD (inflation system and spare tire carrier available as options)
- Suspension Detail: Closed Tandem Air Ride–Fixed, Hendrickson AANT23K Intraxx
- Auto Glad Hand Dump: Installed
- Front Corners: Tapered steel
- Electrical System: LED sealed system: 3 lights/side, 2 lights/side on rear – STANDARD
- Paint: Black urethane on steel parts with Infinity decals– STANDARD
- Conspicuity Tape: Per NHTSA specs – installed in recess on rubrails
- Bumper: Weld-on type – meets underride requirements, painted steel
- Mudflaps: One set OEM STANDARD
- Winch Track: Full length integrated double L type aluminum on both sides – STANDARD
- Sliding Winches: 12: 6 each side; sliding rope hook/winch strap hook retainers – STANDARD (27′ and 30′ winch straps available as an option)
- VIN Plate: Bilingual US/Canadian VIN plate
- Rear Forklift Design: Factory installed Fontaine “Universal” forklift system accepts Moffett, Princeton and Navigator brand forklifts; Dealer and Customer responsible for final adjustment of wheel stops and additional mounting hardware (if needed) to accommodate the specific forklift model being transported.
- Counterweights: (One)48″x 38.75″ and (Two) 48″ x 18.5″ steel counterweights replace 4 ft of aluminum floor at front of trailer. Adds approx 1,112 lbs combined weight. Note that the optional bulkhead adds approx 330 lbs to the front of the trailer.
- Registration Holder: OEM STANDARD installed
- Tool boxes: Available as an option