Bucking Rivets – Trailer Side Panel Replacement

Sounds of a Trailer Repair Shop – Bucking Rivets

Today was one of those days in the shop that reminds you of the importance of having good hearing protection! But as always, the Trailer Technicians sucked it up and got the job done!

In this video one of the Trailer Technicians is finishing up with a side panel replacement on a Hyundai Translead Dry Van Trailer. And since rivets don’t buck themselves, his partner is in the trailer with a rivet bucking bar.

Tools being used include an Ingersoll Rand EDGE Series 114GQC Quick Change Air Hammer and a JLG 1930ES scissor lift.

Ingersoll Rand EDGE Series 114GQC Quick Change Air Hammer

  • Model: 114GQC
  • Average Air Consumption CFM (L/MIN): 4 (115)
  • Air Inlet NPTF: 1/4″
  • Tool Weight: 4.1
  • Bore Diameter: .75″
  • Chisel Shank Diameter: .401″
  • Shank Opening: Round
  • Air Consumption & Load CFM (L/Min): 20  (565)
  • Stroke Length: 2.63″
  • Blows Per Minute: 3500
  • Find Online At: Amazon

JLG 1930ES

  • Power Source
    • Batteries: 4 x 6V, 220 A-h
    • Charger: 20 A automatic
  • General Specifications
    • Brakes: Electric, Friction
    • Capacity – Hydraulic Reservoir: 4.73 L / 1.2 gal.
    • Maximum Ground Bearing Pressure: 8.65 Kg/cm2
    • Hydraulic Pump: Fixed Displacement Gear
    • Machine Weight: 1506 kg / 3320.2 lb
    • Machine Weight (CE & GOST): 1506 kg / 3320.2 lb
  • Performance Data
    • Turning Radius – Inside: 0 m / 0 ft
    • Drive Speed – Platform Elevated: 0.80 km/h / 0.5 mph
    • Drive Speed – Platform Lowered: 4.80 km/h / 3 mph
    • Drive System: 24V Electric
    • Gradeability: 25 %
    • Lift Time: 20 sec.
    • Lower Time: 30 sec.
    • Maximum Drive Height: 5.72 m / 18.8 ft
    • Maximum Lift Height: 5.72 m / 18.8 ft
    • Platform Capacity – Extension: 120 kg / 264.6 lb
    • Platform Capacity – Unrestricted: 230 kg / 507.1 lb
    • Turning Radius – Outside: 1.75 m / 5.7 ft
  • Dimensional Data
    • Ground Clearance: 0.09 m / 4 in.
    • Machine Height: 2.02 m / 6.6 ft
    • Machine Height – Rails Folded: 1.59 m / 5.2 ft
    • Machine Length: 1.87 m / 6.1 ft
    • Machine Width: 0.76 m / 2.5 ft
    • Platform Dimension A: 0.76 m / 2.5 ft
    • Platform Dimension B: 1.87 m / 6.1 ft
    • Platform Extension Length: 0.90 m / 3 ft
    • Platform Height: 5.72 m / 18.8 ft
    • Platform Height – Lowered: 0.89 m / 2.9 ft
    • Platform Railing Height: 1.10 m / 3.6 ft
    • Tire Size: 32 x 10 cm
    • Wheelbase: 1.60 m / 5.2 ft
  • Reach Specifications
    • Platform Height: 5.72 m / 18.8 ft
    • Working Height: 7.72 m / 25.3 ft