Product Spotlight – Trailers
Kalyn Siebert Hydraulic Removable Goose Neck and Mechanical Removable Gooseneck Trailers
From Pinnacle Trailers, a look at their in-stock Kalyn Siebert RGN trailers. Pinnacle has both Hydraulic Removable Goose Neck (HRGN) and Mechanical Removable Gooseneck (MRGN) models available.
Pinnacle Trailers offers both new and used trailers, as well as trailer parts from manufacturers such as Hutch, Hendrickson, Sealco, Avalanche Liners, Quicksilver, Hallco, Mountain Tarp, Cramaro, American Made Liners, Shurco, and more.
Kalyn Siebert Mechanical Removable Gooseneck 2 Axle 40T Trailers
- KS ABBREVIATION: MRGN
- LEGACY NAME: MRGN-2-40T
- CAPACITY: 80,000 lbs distributed in 16’, GAWR & tire rating determine legal loads
- OVERALL NOMINAL DIMENSIONS: 8’ 6” wide X 48’ length. Gooseneck 10’ 2”, main deck 29’ 2” and rear deck 8’ 8”.
Additional options available. - FRONT SPECIAL FEATURES: Front Gooseneck Rollers: Incorporated into king pin plate to keep rollers from extending beyond front of gooseneck.
- GOOSENECK/NECK: Full width mechanical removable type. 2 position hangers allow lower deck height when running empty.
- SWING CLEARANCE: 84″
- KING PIN: 2″
- SETTING: 15″
- 5TH WHEEL HEIGHT: 49″
- MAIN DECK: 29′ 2″
- REAR DECK: 8′ 8″
- MAIN DECK HEIGHT, LOADED: 18″
- BEAMS: Four beam design – 100,000 psi yield flanges and 80,000 psi yield web. 8″ I beams cross member on 24″are 12” in centers
- CROSSMEMBERS: 4” Jr. I-beams on 12” centers.
- FLOOR: 1.5″ Apitong Decking full width, secured with floor screws at every cross member.
- TIE-DOWNS: Lightening square holes™ in both main beams and side rail serve as tie downs, chain slots on rear deck.
- OUTRIGGERS: Clips only. 14 per side.
- D-RINGS: 5 pairs, outrigger clips only; 15 pairs
- TOOL TRAY: Expanded metal tool tray at front of main deck, approximately 6’ long.
- RAMPS: No front ramps as standard. Tapered with approximately 4 3/8” drop to ground.
- SUSPENSION: Ridewell Air Ride, 54” axle spacing & 40″ loaded rear section nominal. None of the axles are built as lift axles.
- AIR CONTROLS: Automatic/Manual ride height control system. Manual regulator can be set based on load and locked to a specific pressure. Manual dump valve standard.
- AXLES: Two axles, OEM, 5” round with 5/8” wall, tapered spindles, 25,000 lb nominal capacity.
HUBS 10 stud, hub piloted, long studs, steel hub. - DRUMS: Cast Drum
- SEALS: Oil
- BRAKES: 16½” X 7” Parking brake on rear axle only.
- ABS: 2S/1M on rear axle.
- SLACK ADJUSTERS: Automatic slack adjusters.
- WHEELS: Steel Wheels
- TIRES: OEM, 255/70R22.5, 16-PR (Low Profile) radial tires.
- MUD FLAPS: Black anti-spray with Kalyn Siebert logo.
- REAR LUGS: Optional
- UNDER RIDE: Standard
- FINISHING (PAINT & TRIM): Shot blasted prior to paint. Epoxy primer and Black (standard) polyurethane paint. Air, electrical and hydraulic lines installed after painting is completed.
- LIGHTS & ELECTRICAL: Sealed beam, 12 volt. 7-way plug.
- CONSPICUITY TAPE: Discontinuous on sides.
- MANUAL: One operator manual per order will be provided. Parts manual available as option.
- WARRANTY: 5 year prorated frame warranty. 3 year prorated paint warranty. 1 year warranty on remainder of trailer.
- WEIGHT: 14,660 lbs + – 3% tolerance
- ADDITIONAL INCLUDED OPTIONS: FLAG HOLDERS: At rear of gooseneck each side, front of deck, and in rear bolster.