Fruehauf 53′ Composite Dry Van Trailer

Fruehauf

Product Spotlight – Trailers

53′ Composite Dry Van Trailer

In this video, Don Brown, Fruehauf Sales Director, gives us a look at the Fruehauf 53′ Composite Dry Van Trailer.

Fruehauf 53′ Composite Dry Van Trailer:

  • Model: FBAC9+1.5-LP-HT2-53W
  • Overall Length: 636″
  • Inside Length: 630 1/16″
  • Overall Width: 102″
  • Inside Width: 101″
  • Overall Height: 165 9/32″
  • Inside Height: 110″
  • Fifth Wheel Height: 47 1/2″
  • Approx Weight: 14,350 lb
  • CONSTRUCTION
    • Coupling Plate: ASTM 572 Gr65, 5/16″ thick
    • Kingpin: 2″ Holland
    • Material: Composite plate, 7.5mm
    • Posts: Logistic posts on 24″ centers with “A” slots
    • Upper Rail: Extruded aluminum 6061-T6
    • Lower Rail: Extruded aluminum 6061-T6
    • Scuff: 12″ galvanized steel, 16 gauge
    • Material: Aluminum 0.040″ thick
    • Roof Bows: Antisnag 24″ centers galvanized steel
    • Bonding Roof Skin to Roof Bows: Bonded with adhesive tape
    • Roof Protector: Riveting to be over “J” profile installed over the roof skin
    • Rear Frame and Door: Material: ASTM572 Gr55
    • Rear Frame and Door Corner Reinforcements: 2 corners of frame to have steel reinforcements; lower ones to protect the lights
    • Rear Door Type: 0.5” composite swing door
    • Lock Rods: 1 per door
    • Aluminum Hinges: 5 per door; Bottom hinge bolts to be welded to the nuts, galvanized steel
    • ICC bumper design: Nonskid surface, conspicuity tape to be recessed no less than 3 mm, height to road to be 20″
    • Rubber Bumpers: 2 solid rubber at the corners
    • Flooring: Laminated oak, 1-5/16″ thick, pre undercoated
    • Landing Gear: Holland Atlas 55,000
    • Tire Carrier: Single basket
  • HEADBOARD
    • Material: Prepainted white aluminum 0.048″ thick
    • Posts: 4 galvanized steel 14 gauge
    • Bulkhead: Included
    • Air and Electrical Connections: Road side
    • Corners: Aluminum gauge 1/8, 5″ radius
    • Top Rail: Extruded aluminum 6061-T6
    • Inside lining: Composite 6 mm
  • SUSPENSION
    • Suspension: Pneumatic, Hendrickson’s Vantraax HKANT50K
    • Axles Capacity: 25,000 pounds
    • Brakes: 16 1/2″ X 7″
    • Brake Chambers: Size 30/30
    • Sliding Frame: With 4 pin support
    • 4 inches “I” beams, 80,000 PSI, spaced @ 12″ over suspension frame, landing gear and bay area
    • ABS System: 2S/1M
    • Mud Flaps: Two hard rubber 24″ x 30″
  • LIGHT SYSTEM
    • Harnesses: Grote sealed
    • Front Connector: Phillips, 7 way
    • Lamps: Grote, meeting FMVSS-108
  • WHEELS & TIRES
    • Wheels: Pre-painted white 8.25 X 22.5 steel disc
    • Tires: Low profile 22.5 radial tires
  • ADDITIONAL OPTIONS
    • Tire inflation system
    • Aluminum wheels
    • Side skirts