Home » Trailer Industry Tools » Trailer Technician Tool Set » Tiger Tool Brake Anchor Pin Press (16002)
Trailer Technician Tools: Specialty Tools
Tiger Tool Brake Anchor Pin Press
The Tiger Tool Brake Anchor Pin Press (16002) is used to remove brake anchor pins and bushings on trucks and trailers.
Features
- Remove brake anchor pins and bushings on virtually all 16-1/2” S-Cam trailer and tractor “Q” brake systems.
- No need to remove the hub or dust shield.
- Rigid C-frame with 10-ton capacity.
- Manufactured from high-grade steel.
Parts
- 16002-1: C-Frame
- 16002-7: Forcing Screw
- 90150-16: 1 1/4″ Anvil
- 16002-3: Centering Bushing
- 16002-5: Bushing Remover
- 10202-5: O-Ring #2-012
- 16002-6: O-Ring #021
- 10202-4: Magnet
Operating Instructions
NOTE: In the event you are servicing a stamped spider, a punch and chisel may be required to remove the bushing.
Anchor Pin Removal
- Install the Centering Bushing onto the back side of the Anchor pin shoulder.
- Position the C-frame over the anchor pin (and centering bushing) and tighten
the forcing screw by hand until the anvil makes contact with the front side of the
anchor pin. - Apply force with a ¾” impact wrench until the anchor pin has been removed (Note: centering bushing may push out of the C-frame, this is normal)
Bushing Removal
- Install the magnetized bushing adapter on to the anvil.
- Position the C-frame over the bushing in the spider so the “step” in the bushing
adapter seats inside of the bushing. - Apply force with a ¾” impact wrench until the bushing has been removed.
Preventative Maintenance
- Keep forcing screw clean and lubricated at all times with SAE 30 lube for the threads.