New Hassle-Free Multi-Functional QWIK-CLAMP™ From Phillips Industries Secures Cables in Seconds
Santa Fe Springs, CA – (Trailer Technician) Phillips Industries introduces their new patented multi-functional QWIK-CLAMP™, a hassle-free, robust, corrosion-resistant solution for securing hoses or cables to any support system between a tractor and trailer. It converts easily from a 1, 2, or 3-hose holder to a cable clamp for a 3-IN-1 by simply removing an insert.
- 17-181: QWIK-CLAMP™ cable clamp for Phillips 3-IN-1 assemblies or other applications 1.60″ in diameter
- 17-180: QWIK-CLAMP™ cable clamp, with insert, for 3-IN-1 assemblies (I.D. 1.60″), or 1 , 2, or 3 individual cables
- 17:1481: Tracker Spring Kit, 20.5″ extra heavy duty spring, with QWIK-CLAMP™
Unlike traditional hose holders and cable clamps, with the QWIK-CLAMP, cable installation takes seconds and requires no tools. The clamp’s secure draw latch creates a positive lock, keeping up to three cables or a 3-IN-1 in place, staying connected at over 100 lbs. of pull force. With the insert installed the QWIK-CLAMP supports straight ABS electrical cables and 3/8” rubber air hoses, or coiled ABS electrical cables and nylon air lines with long leads. Without the insert, it will support all Phillips 3-IN-1 assemblies and other applications approximately 1.6” in diameter.
Phillips QWICK-CLAMP Without Insert:
- Part No: 17-181
- Multi-Functionality: Can be converted from a 1, 2, or 3-hose holder to a cable clamp for a 3-IN-1 by removing the insert.
- No Hassle Installation: Quick, easy, and no tools required. Installs in seconds, and cable location adjustment is easy.
- Stainless Steel Snap-On Clip: For quick installation onto a tender spring or pogo stick.
- Secure Draw Latch: No accidental releases, clamp remains securely and tightly locked.
- Positive Lock: Stays connected at over 100lbs of pull force.
- Non-Corrosive and UV Resistant: Clamp and insert are made of non-corrosive and UV resistant durable nylon for extreme weather, corrosion and impact resistance.
- Clamp Ridges: Clamp remains in place, securely gripping the 3-IN-1, no sliding.
- Recommended Assembly/Cable Sizes: 3-IN-1: Clamp will support Phillips 3-IN-1s or assemblies approximately 1.60” in diameter. Hose Holder: Supports straight ABS electrical cables and 3/8” rubber air hoses, or coiled ABS electrical cables and nylon air lines with longer leads.
- Working Temperature: -40°F to 150°F (-40°C to 66°C)
- Patent No.10436352
Phillips QWICK-CLAMP With Insert:
- Part No: 17-180
- Multi-Functionality: Can be converted from a 1, 2, or 3-hose holder to a cable clamp for a 3-IN-1 by removing the insert.
- No Hassle Installation: Quick, easy, and no tools required. Installs in seconds, and cable location adjustment is easy.
- Stainless Steel Snap-On Clip: For quick installation onto a tender spring or pogo stick.
- Secure Draw Latch: No accidental releases, clamp remains securely and tightly locked.
- Positive Lock: Stays connected at over 100lbs of pull force.
- Non-Corrosive and UV Resistant: Clamp and insert are made of non-corrosive and UV resistant durable nylon for extreme weather, corrosion and impact resistance.
- Clamp Ridges: Clamp remains in place, securely gripping the 3-IN-1, no sliding.
- Recommended Assembly/Cable Sizes: 3-IN-1: Clamp will support Phillips 3-IN-1s or assemblies approximately 1.60” in diameter. Hose Holder: Supports straight ABS electrical cables and 3/8” rubber air hoses, or coiled ABS electrical cables and nylon air lines with longer leads.
- Working Temperature: -40°F to 150°F (-40°C to 66°C)
- Patent No.10436352
The stainless-steel carbineer allows for quick attachment of the clamp to a tender spring or pogo stick. The clamp body and insert are made of non-corrosive and UV resistant durable nylon for outstanding performance in extreme weather conditions with a working temperature of -40°F to 150°F (-40°C to 66°C).
In addition to the clamp itself, Phillips has also launched a tracker spring kit with QWIK-CLAMP. It combines the multi-functional technology of the QWIK-CLAMP with the strength and durability of their extra heavy-duty galvanized 20.5” tender spring. The entire system clips on and off the back of the cab without unbolting the sliding tracker bar. The result is an all-in-one, easy-to-install cable support system for various applications.
Phillips Tracker Spring Kit With QWIK-CLAMP:
- Part No: 17-1481
- An all-in-one, easy-to-install cable support system for multiple applications
- Tender Spring
- Metal Snap-On Clip: Quickly unhook the spring assembly without unbolting the tracker bar (P/N: 17-160)
- Durable PVC Sleeve: Stays with the top of the spring
- Heavy Gauge Galvanized Wire (.10): Better recoil memory and longer spring life. Stretches to 35” at 30 lbs. of pull force (P/N: 17-121)
- QWIK-CLAMP™
- No Hassle Installation: Quick, easy, and no tools required. Installs in seconds, and cable location adjustment is easy.
- Multi-Functionality: Can be converted from a 1, 2, or 3-hose holder to a cable clamp for a 3-IN-1 by removing the insert
- Stainless Steel Snap-On Clip: Unhook the QWIK-CLAMP™ in seconds (P/N: 17-173)
- Recommended Assembly/Cable Sizes:
3-IN-1: Clamp will support Phillips 3-IN-1s or assemblies approximately 1.60” in diameter - Hose Holder: Supports straight ABS electrical cables and 3/8” rubber air hoses, or coiled ABS electrical cables and nylon air lines with longer leads
Both products offer versatility that is great for fleets with varying types of air and electrical applications and both are appealing in a retail setting, offering cable support that suits many different customers’ needs. The QWIK-CLAMP with insert (17-180) and tracker spring kit with QWIK-CLAMP (17-1481) are currently available from Phillips’ authorized dealers. The QWIK-CLAMP without insert (17-181) has been available since August and is the standard clamp included with all Phillips premium 3-IN-1 assemblies with QCMS2®/QCP™ or QCP electrical connections.
Please visit us at www.phillipsind.com to learn how Phillips products can make a difference in your operation.
About Phillips Industries
Since 1928, Phillips Industries has been recognized as a leading innovator and manufacturer of advanced electrical and air brake system components, as well as electronic solutions for communicating vehicle data to fleets and their drivers for the commercial truck and trailer industry. Phillips’ products are standard on nearly 100% of Class 8 trucks, more than 50% of all trailers manufactured in North America, and can be purchased at virtually all premium distributors. Phillips has manufacturing and distribution facilities throughout the US and Canada, as well as Mexico, China, and Europe. Phillips maintains active membership in key industry associations including American Trucking Association, SAE, Truck Trailer Manufacturers Association, Heavy Duty Manufacturing Association and various state trucking associations. Their manufacturing facilities have earned the top-quality accreditations including ISO/IATF 16949 and ISAO 14001 as well as multiple prestigious customer awards from Daimler, NAPA, and many others.